If you are a woodworking enthusiast, you understand the importance of precise cuts. The table saw is a tool that is commonly used for cutting projects. But achieving a superior precision level requires years of practice.
An aftermarket table saw fence is a woodworking tool that can help you get accurate cuts safely, every time. The table saw fence would hold the material you are working on in place. You can then cut the material in the desired shape.
Shop Fox W1716 Aluma-Classic Fence
Our Top Recommendation for Aftermarket Table Saw Fence!
The Shop Fox W1716 Aluma-Classic Fence is a highly durable aftermarket table saw fence that specializes in precision cuts. The fence has standard 57-inch rails, with a 30-inch maximum rip capacity.
*We earn a commission if you make a purchase, at no additional cost to you
These fences differ in terms of material, size, compatibility with table saws, and cost. If you are looking for a table saw fence, the article will take you through the top quality products available in the marketplace.
What is the Best Aftermarket Table Saw Fence?
The answer to this question differs from one person to another. Factors like the type of projects and table saw you use affect the table saw fence model you should buy.
For example, the fence should be compatible with the model and hole pattern of the table saw. Both tools should align in terms of measurement. If the fence is too small for the table saw, it will negatively impact stability. If the fence is larger, the cutting process could end up being a hassle for you.
Thus, it is essential to pick a table saw fence that best suits your requirement.
For your convenience, the below table contains distinguishing features of table saw fences that will suit your varying woodworking needs.
| IMAGE | PRODUCT | FEATURES | PRICE |
|---|---|---|---|
 | Shop Fox W1716 Aluma-Classic Fence | • Reduced weight • The right-angle design • Adjustable magnified cursor | |
 | Shop Fox W2005 Classic Fence | • Simple lift-off design • Standard rails, 25-inch rip capacity • straightforward locking cam | |
 | Shop Fox W1410 Fence | • Fine positioning knobs on both sides • Ball-bearing guides for effortless movement • It fits major table saws | |
 | Wixey WR700 Saw Fence Digital Readout | • mount on either side of the fence • Large display with different measurement • Maintain calibration with magnetic | |
 | Carter Magfence II Universal Magnetic Fence | • Beginner-friendly tool • Easy attachment and removal • Magnetic attachment, universal fit | |
 | Fulton Precision Miter Guage | • 45° fence end for maximum • Aluminum flip stop for repetitive cuts • Easy to adjust | |
 | Powertec BS900RF Rip Fence | • Fully assembled • A clamp designed for a firm fit • Industry-grade aluminum construction |
Best Aftermarket Table Saw Fences
Buying a table saw fence is a long-term investment. Thus, you should take your time researching options before clicking on the ‘Add to Cart’ button.
Here is a list of top table saw fences to help you decide which tool will become your trusted partner.
1. Shop Fox W1716 Aluma-Classic Fence
This fence model from Shop Fox comes with standard 57-inch rails. The tool provides optimal precision with its right-angle design and wide-spaced adjustment points
The fence provides a 30-inch rip to the right of the blade. However, the rip capacity of the model limits the fence used to small projects.
The steel and aluminum body of the fence makes it a sturdy and durable choice. In addition, the construction materials used help reduce the overall weight of the tool.
The fence comes equipped with features like an adjustable magnified cursor, a self-adhesive measuring tape, a single locking cam action lever, a torsion box design, and adjustable fence wear pads.
This model can indeed fit about any table saw you own. But you will have to drill holes on the rails for that perfect fit. So, take your time setting up the tool.
Magnified Cursor
The combination of a self-adhesive measuring tape and the magnified cursor makes reading measurements easier. The tape comes in a bright yellow color with the numbers in black. You will find graduations in both metric and SAE scales.
This well-thought detail will help you position the fence accurately.
Strong Locking Lever
The single locking cam action lever provides solid support. You can adjust the lock easily with one hand.
Once you position the fence as per your requirement, the locking mechanism ensures no movement. In addition, the torsion box design ensures no displacement when you are guiding the wood.
Pros and Cons
What We Liked
- Highly durable
- The right-angle design provides optimal precision
- Heavy-duty locking lever for support
- Adjustable magnified cursor improves visibility
- Can be used with most table saws
What We Didn’t Like
- Rip-capacity restricted to 30-inch
- Installation instructions can be challenging to understand
2. Shop Fox W2005 Classic Fence
The W2005 Classic Fence is another quality and model from Shop Fox. It has a classic design that offers high functionality. If you aim to have a robust and precise aftermarket table saw fence at a budget-friendly price, this is the model for you.
It comes with standard rails providing a 25-inch rip capacity to the right of the blade. The wide-angle design of the fence ensures you have ample support and cut accurately.
This model is easy to install and use. If you are new to woodworking, seek help with installation. It is compatible with most brands of table saws. Another unique feature of the fence is the lift-off design. You can remove the fence when not required and also reinstall it with the same ease as needed.
The simple cam lever ensures the fence stays locked in position. You can easily fine-tune the tool with the adjustable slider pads. It also comes with replaceable side panels made from HDPE plastic. The materials offer high resistance to wear and tear caused due to repetitive friction.
With the rip capacity limited to 25 inches, the fence will work better with smaller table saws. You can look into the optional long rails that provide 54-inch rip capacity.
Easy to Use
The W2005 Classic Fence comes with a single locking cam action lever, using which you can make adjustments one-handedly.
The HDPE material used for side panels and the torsion box design ensure guiding wood around the tool is effortless.
The magnified cursor and self-adhesive scale make reading measurements easier. Additionally, the cursor can be mounted on any side of the fence.
Lift-Off Design
You can lift the fence off the rails anywhere along the length. This is a convenient feature when making cross cuts or using different jigs and fixtures.
Pros and Cons
What We Liked
- Works well with most table saws
- Increased durability with powder coated paint for fence body
- Provides tough abrasion resistance
- A magnified cursor for better readability
What We Didn’t Like
- Limited rip capacity with 25 inches
- Installation can be complex for novice woodworkers
3. Shop Fox W1410 Fence
This basic aftermarket table saw fence from Shop Fox provides professional accuracy to your projects. The fence will fit most of the major 27-inch table saw brands. The model is one of the low-cost fences that are compatible with older versions of the saws as well.
Depending on the table saw model, you will have to drill holes to install the fence. Follow the instructions that come with the fence carefully, and you are good to go. The ball bearing guides enable the tool to move effortlessly. The locks on both ends make using this fence a breeze.
The locking lever allows for repeatable cuts without any fence movement. Positioning knobs on both sides ensure you can use the fence seamlessly, regardless of one being right or left-handed.
Accurate Results with Minimal Effort
The locking system on both ends makes it easy to use with a range of table saws. The fine positioning knobs on both sides make cutting and trimming hassle-free tasks. With the ball-bearing guides, you can move the fence smoothly. A slight push on your end is all you need to get the fence gliding.
Pros and Cons
What We Liked
- Ball bearings offer unrestricted movement of the fence on the table saw
- It fits major table saw brands
- Locks on both ends
- Fine positioning knobs available on both sides
What We Didn’t Like
- Drill quality is low compared to fancier fence options
- Follow instructions to the T for an accurate fit
4. Wixey WR700 Saw Fence Digital Readout
Absolute precision is the reason why users prefer this model from Wixey. The unit has a total length of 60-inches. In addition, it uses ‘Precision Fraction Technology,’ patent-pending, which enables fractions to be displayed with an accuracy of up to 0.002 inches per foot.
The kit comes with all the necessary hardware required for mounting, such as brackets, self-threading screws, and drill bits. It works well with most of the round rail and rectangular rail fences.
The Wixey WR700 saw fence’s digital readout operates on 2 AAA batteries. Its power-packed digital readouts make taking measurements and cutting with precision an easy task.
The large readout displays different measurements like inches with fractions and millimeters.
You can use absolute or incremental measuring mode when working on a project. Once updated, the machine will retain the settings even when turned off. If you need to perform repetitive tasks, this feature comes in handy.
Easy to Setup and Use
The readout can be easily attached to your existing table saw fence. The kit comes with a detailed set of instructions depending on the type of fence. The hardware necessary to mount the unit to the bottom of the fence is also included in the kit.
The display readout is large and easy to read. In addition, fence removal and replacement have been simplified thanks to the magnetic attachment method.
Make Repetitive Cuts with Precision
You can calibrate the unit on either side of the blade. The process is as simple as moving the fence towards the blade while holding the calibrate button. In addition, it comes with a unique magnet system that allows you to remove the fence while the readout stays calibrated at all times.
Users have found the unit to retain accuracy even when the fence has moved back and forth throughout the day. And also, when you remove the fence, put it back and make the same cut.
Pros and Cons
What We Liked
- Precise measurements
- A rip capacity of 60 inches
- Digital readout can be attached to either side of the fence
- Preserve battery with auto shut off function
What We Didn’t Like
- Requires recalibration to maintain performance.
- Rail quality could be better.
5. Carter Magfence II Universal Magnetic Fence
If you are new to the world of woodworking, here is an aftermarket table saw fence that is best suited for you. Most traditional fences require expertise in drilling holes during installation. This fence presents an alternative with its use of powerful magnets.
Instead of locking systems, the fence holds the board in place with the help of magnets. The tool truly lives up to its name of being a universal fence. The fence can fit on most steel and cast iron tables.
The fence’s dimensions are 16″ in length, 3-1/2″ in height, and multiple T-slots. It is made from aluminum, which means the product is durable. The model comes with two magnets that you can switch to make quick adjustments per your need.
Universal Fit
You can use the fence on different metal tables regardless of its size. You do not need any brackets or mounts for installation. You can simply attach the fence to the surface and let the magnets take over.
You can even remove the fence with the same ease. Moreover, it can be used with various other tools like a bandsaw, spindle sander, and drill press, among others.
Beginner-Friendly
Working with other types of table saw fences requires some level of expertise. In addition, the installation process can be tricky. If not followed correctly, you will be left with a tool that is not optimized for precision.
You can leave these worries behind with Carter Magfence II Universal Magnetic Fence. Instead, you can attach the fence and perform tasks like cutting, positioning, drilling, or aligning easily.
Pros and Cons
What We Liked
- It fits easily on most metal surfaces
- Attach, adjust and remove the fence with ease
- Great product for beginners
- It can be used with multiple types of equipment
What We Didn’t Like
- It is not recommended for professional use
- Ripping large wooden boards can be challenging
6. Fulton Precision Miter Guage
The Fulton Precision Miter Gauge is an economical fence option you should consider. The Fulton Miter Gauge, Aluminum Miter Fence, and Aluminum Flip Stop are three items that work together to fulfill your table saw needs.
One of the distinguishing features of the product is the 45° fence end that provides maximum workpiece support and holds it in place. As a result, you can position the fence closer to the blade. And also have better control of the workpiece.
The wood binding issue that you might have experienced with a standard 90° fence end is resolved with the change in angle. You can now get much more precise and cleaner cuts.
The head is made from 200″ thick solid aluminum, which can be adjusted and has 13 positive stop holes. The aluminum head is fitted onto an 18″ solid steel miter bar. The precision miter gauge is made from a single piece of extruded aluminum. The quality materials used for construction ensure the durability of the product.
Aluminum Flip Stop for Repetitive Cuts
Using a standard miter gauge for repetitive cuts can be a hassle. You do not want to keep adjusting the gauge and the fence while working. The product resolves this issue with a convenient aluminum flip stop.
Slide the flip stop to the desired position, lock it in and make your cuts. You can either remove the fence or pull the stop upwards when not in need.
Easy Adjustment
The miter gauge comes equipped with 13 positive stops. You can loosen the handle by turning it counterclockwise. Next, pull the pin lock up and adjust the miter gauge to the required angle. Once positioned, release the pin lock; it will fall back into place. Lastly, secure the handle by turning it clockwise.
The positive stops do not limit your angle range. You can work on any angle of your choice by pulling the pin lock upwards and turning it so it does not interfere with any of the positive stop holes.
Pros and Cons
What We Liked
- Crosscut angles with ease and precision
- 45° fence end prevents binding and provides cleaner cuts
- Positive stops included at the most common angles woodworkers use
- Steel miter bars with removable disc and adjustable spring-loaded plungers for a better fit
What We Didn’t Like
- You will need time adjusting to the tool
- Using positive stops requires some hands-on experience
7. Powertec BS900RF Rip Fence
The Powertec aftermarket table saw fence model is sturdy and durable. It is designed to work with 300mm or 11-13/16″ tables. The fence can be adjusted from 11-3/8″ to 12″ by turning the lock lever. Turn clockwise to shorten the length and turn counterclockwise to increase the length. In addition, you can produce straight parallel cuts with this fence.
The product is made from industrial-grade aluminum. This means the product will last for a long time. So it will provide good value for the money you spend. The fence snuggly fits into a square for safety and performance reasons.
Another advantage of this Powertec model is that it comes fully assembled. You can use the fence right out of its package. You may require minor adjustments. So if you are new to woodworking, start with this no-fuss, easy-to-use fence.
Maximum Support
The Powertec fence is designed to fit firm and square to the table. This angle provides optimal support. The model also comes with a handy cam-lever, using which you can adjust and secure the placement lock.
Be careful when setting your fence up. You can adjust the clamp according to your table. But if you feel resistance when pushing the lever down, loosen the clamp. If you try to force the lever down, it might break the cam.
Pros and Cons
What We Liked
- Extruded aluminum construction – is durable
- It makes straight parallel cuts
- Effective cam-lever action
- Firm clamp design supporting ripping action
What We Didn’t Like
- Not compatible with worktables thicker than 9/16″
- Not compatible with saw requiring guide rails
Summary
A table saw fence is a value-adding tool that should be part of your woodworking workshop. It helps secure your material in place and provides support. Moreover, you can perform actions like cutting and drilling safely. You can make professional-grade precise cuts with them.
Measure your work table and types of table saws. See if the fence is compatible with the equipment you already own. Understand your requirements before you go buying a fence.
We hope the above list of aftermarket table saw fences help you arrive at a decision.
By
